-
"Summer/Cooling mode" for wall thermostat
Hi there, I have an underfloor heating with a cooling function. In summer, cool water can run through the floor to cool the room. For that I currently need to set the temperature to max (25°C) to keep the thermostats open. If the room temperature would rise above 25°C the thermostats would close and prohibit a cooling…
-
Heating
Todo app is telling me I’m useing more than I am
-
Offline notification
My Internet Bridge went off-line and I didn't realise for hours. A simple reset was all it took to fix the issue, which I could have done way sooner if I'd realised. Tado sends other notifications, like a thermostat needing batteries. I would like Tado to send me a notification, either push-notification in the app, or…
-
Google Home Integration for On/Off Hot Water
I have a fairly old boiler with no digital temp control. Tado supports simply turning the hot water on or off. Google Home shows a entry for the hot water but does not allow me to change its state. Tado support told me: "You have the Hot Water tile enabled in your tado° app. However it is a relay ON/OFF control and you can…
-
Make On/Off Controls Available on Home Screen
It would be more convenient if each tile included a basic on/off control to save you having to go into a new screen first. You already display a 'power' icon in the top right of each tile - see attach - make this live so that clicking it actually works. See Tapo smart device app for example where this is already supported
-
Set hot water temperature through HomeKit
HomeKit integration was a main driver for me to choose tado. I don't like being dependent on cloud services for things that are practically local to my house, so I have configured HomeAssistant to use it through the HomeKit integration. However, after installing it, I found out that there is an important feature that is…
-
One-click hot water control with 'turn off water' and 'resume schedule' button
I use the mobile app to control my central heating and hot water system. I don't use geofencing as my wife often leaves her phone at home. I do however frequently use the option to 'Turn OFF all rooms' and then 'Resume schedule' later. I would really love a similar option to 'Turn OFF hot water' and then resume the hot…
-
my.tado.com : support for 2FA
Hi. There is a ETA for support 2FA for the accesso to my.tado.com ? Best regards
-
Introducing myself
As suggested by @samd, I am making a short post to introduce myself as the community forum’s new admin. Hello! My name is Emcee, I live in Munich, Germany and am a member of tado°’s Customer Experience team. I hold a M.Sc. from the Technical University of Munich. My thesis was focused on hydroelectricity. I worked in the…
-
Adding Wireless Thermostat change my zone config - not right to me
I have a number of wired thermostats downstairs all working for about 6 months. Then added a wireless controller and thermostat upstairs. But all the downstairs ones had their zone changed to use the wireless controller as the zone controller and I dont remember saying this was OK, i did set up the pair of controller and…
-
Redesign internet bridge and provide longer cables.
Hello. I would to suggest that: 1. The internet bridge is designed so that the cables come from the top not the bottom of the device. This would allow the device to stand upright freely away from the wall (2 requirements for best placement) 2. I would also like longer cables to be provided for the internet bridge - the…
-
Spring/Summer and Autumn/Winter settings
Depending on the time of year, I change the temp I want to heat rooms to. So around early April I adjusted things and will do so again in October. It would be useful to have a quicker way to jump between these two settings.
-
Set a manual time limit on Manual Away Mode to go back to auto.
Set a manual time limit on Manual Away Mode to go back to auto similar to the manual timer mode on the TRVs/Thermostats.
-
Remove the 10 room limit from the controller
Please remove or increase the 10-room limit from the controller. I have to group rooms together to make my system work which is not ideal.
-
Need to add an additional Heating Unit in the Energy IQ feature (Cubit Feet) for the UK
I'd like to request that the Tado Development team add an Heating Unit of Cubic Feet (ft3) in the Energy IQ part of the app. At the moment, there is only m3 (cubic metres) and Kwh there at the moment, and a huge number (Millions) of UK homes have gas meters with cubic feet callibration not m3 or kwh. Without having Cubic…
-
Develop a "basic backup schedule" mode for when Tado outage or loss of internet
tado EDIT 10.02.2021: Please read my statement on this topic here: https://community.tado.com/en-gb/discussion/comment/22789/#Comment_22789 Original post: When Tado devices lose access to the Tado servers, either due to a Tado server outage (as has occured a few times), or due to temporary internet issues at the property,…
-
Maximum opening percent and time on radiator thermostate
To ensure not to send hot water out of the radiator, it could be helpfull to could adjust the maximum opening percentage combined with maximum opening time, followed with a minimum closing time.
-
Vertical Radiator - Towel Rails - Smart Thermostat interface
In modern houses, we now find a lot of vertical radiators - they are space savers and also act as features. In my home, I have three vertical radiators I cannot interface TADO with, its frustrating as I cannot control these rooms/areas as I can with the rest of the house. Can TADO review the interfaces and advise of a…
-
Release a smaller, cheaper Wireless Temperature Sensor for the Smart Radiator Thermostats
The recently released "Tado Wireless Temperature Sensor" is essential, in many scenarios, to have accurate operation of the Tado Smart Radiator Thermostats. Which, due to their proximity to the radiator, are not typically able to measure the actual room temperature themselves. However, many find the price (£69.99 / 79,99€)…