-
In what steps can the radiator valve regulate heat? And for the thermostat?
So what I'd like to know: In what states can the radiator valves be? Is it fully open, half open, closed? Or are there different options What do the three wavy lines mean? Do they correspond to the valve states or to the required power from the heater? I'm trying to better understand how tado works to optimize my own…
-
Wireless receiver wiring question - CH NC
Hello, I have tado up and running for the last 8 months on my old combi boiler, my boiler died and I have had a new make combi boiler installed. I have selected the correct boiler for installation instructions, the brown, blue, grey, black get wired to wireless receiver and boiler panel, but in the set up instructions it…
-
Tado X - few setup questions
When upgrading my setup to Tado X I noticed some notable differences and was wondering if anyone had similar challenges and how to overcome them. 1. Can't add more than one Smart Temperature Sensor to a given room - with the old hardware I had 2 sensors in larger rooms - whilst only one was set to sense temperature, I used…
-
Share an App
Good morning everyone, I have a question that could interest many of you. I have two apartments where in one I have a system with Tado valves where I can easily manage via app. In the other I have not installed anything yet. My question is: if I buy Tado valves for the second apartment can I always use the same App or do I…
-
Merged: Removal of IFTTT integration
This discussion has been merged.
-
Merged: Tado X unresponsive when one of the border routers drops off
This discussion has been merged.
-
Merged: Configuring Tado X - multiple smart home platforms
This discussion has been merged.
-
Last ditch attempt before I send my Tado wired thermostat back (UK)
Hi all, I am wondering if anyone has successfully got the following to work and if so, how? I am just at the point of giving up and returning the Tado Wired thermostats. So the background is: I recently moved into a new build and it has a combi boiler and a dual zone thermostat wired setup to a wiring centre. The boiler is…
-
Possible workaround for multi-home users on Samsung Android devices
Hi folks There's been quite a few posts on the multi-home support issue which got me thinking that surely it's possible to run multiple copies of an app on your phone. I have a Samsung Galaxy S9 and it appears that the Samsung Secure Folder feature will allow you to have a separate copy of the Tado app with different…
-
Tado valves and Beretta meteo mix 24 csi boiler
Good evening everyone, I'm Mario from Italy. In my home I have 8 radiators, 6 on the ground floor and two in the basement (tavern + laundry), all managed by a thermostat located in the room on the ground floor. Now I need to better regulate the temperature in the basement and I was thinking of adding thermostatic valves on…
-
I can’t find a set up for a Baxi platinum compact combi 36 boiler, can I use a Tado thermostat
I want to use Tado with my current system but there’s no set up for a Baci Platinum Compact Combi 36 boiler. I have a wired system.
-
Has Crowdstrike affected Tado?
The tado app on my phone suddenly stopped recognising my tado sensor. It is shown as "Offline". Is this related to the Crowd strike/Microsoft problem? Do I need to do anything, or will it be resolved by tado themselves? Thanks.
-
How do I get my old Home removed?
I moved out of a flat with a tado, adding the new owner to the home and getting them to remove me. I've bought new tado devices for my new place, but it seems we missed the step where they take total ownership of the home. As such I can't create a new Home for my new devices. The chat agent suggested contacting them but…
-
internet goes down
I turned the hot water on last night then my internet went down I could not turn it off I tried to turn it off on main controller but after a couple of minutes it turned itself back on I ended up turning main power off to boiler does any one a way I can control system when internet goes down
-
boiler cycling alot in Opentherm
hi, i have the radiator and room thermostats in 5 rooms, and only my living room is set to call the heat, the other radiator thermostats are not assigned a zone controller. i've had a viessmann vitodens 050 installed 2 years ago running in opentherm. although it regulates the heat well and doesn't overshoot alot at all and…
-
Getting connecting to the server has failed..
I get the error only when I connect from my local network wifi. If I use my smartphone from a remote location everything works fine. Please help. Seve
-
Are these two models same for wireless starter kit?
V3P-SK-WTS01WRP01/B01-TC-UK-00 V3P-SK-WTS01WRP01/B01STAND-AZ-UK-00 second one has a stand but I am more interested to know if first one is EU version or not.
-
Add boiler control to starter kit installation
I installed a starter kit (WiFi room controller, bridge, and four TRVs) last year, which is working just fine. Now I'd like to add direct boiler control, our Grant Vortex seems to be suitable. It has a very old digital controller ("TimeGuard") on it to control the heating and hot water circuits and it's this I want to…
-
Dual Tado Wired Thermostats - Keep switching heating on
I have replaced two Danfoss TPOne-B thermostats with wired thermostats one thermostat is for the ground floor the other the first floor. Initially when they were installed the heating for both floors kept turning on even when they were set to off, I had to remove them to switch the heating off. Having done some research…
-
Change language
Hallo can some one help me and explain how I can change the language in the App
-
I bought a second system for another home how can i add it to app
Hi I have just bought 2 tado systems not realizing that you can only have one account on the app , is there any upgrade coming to sort this issue
-
Internet Bridge v1 v v3+
Hi, I have the original internet bridge along with extension kit and smart thermostat and more recently added smart radiator thermostats. I'm looking at some of the offers for starter kits - the main attraction is getting more radiator stats but bigger thought is, do I need a new bridge ? What do I get with a newer bridge…
-
TRVs only, upgrade to whole system later?
Good morning, I'm sure this must have been covered before, but I couldn't find it in the search (probably not using the right terms) - we have a Vitodens 100W (living in the UK), which I can control via the ViCare app. I'm basically looking into a way how I can control the individual rooms in our 2bedroom house…
-
Tado Internet Bridge wont connect
Just changed WiFi to Virgin (hub 5) the the Tado internet bridge will not connect despite several resets. The pairing light flashes on the bridge but nothing else happens. It worked so easily on the old router as well 😥 Any suggestions?
-
Plastic sensor too prominent
I have 8 x Tado valves working well in my house. Unfortunately it seems that an additional vale I wanted to add has a problem, with the plastic sensor sitting too prominently and not being inside its recess. Any ideas how to fix this? I’ve tried to push it back and gently rotate the sensor but it doesn’t seem to want to…
-
Merged: End of support for IFTTT
This discussion has been merged.
-
Tado Wireless receiver offline
Hi Folks, We are away from home on a 3 week vacation. I tried checking my tado status using the App and the wireless receiver is appearing offline. All the instructions suggest to repair but it won't be possible as we are away. All my other devices like cameras are online so it is not Internet issue. Any suggestions on how…
-
Separate Installation for Granny Annexe
I currently have Tado installed in my home. All is working great. At the back end of my garden I have a granny annexe. I have a system boiler with Megaflo that feeds hot water and heating for the main home and the annexe. Each location has a separate valve for radiators that allowed me to control main home and annex…
-
Tado X and EveHome Thermo?
I am not seriously suggesting anyone do this but the new Tado X range raises an interesting possibility. I would be more interested in knowing this is possible as a sign of Tado being truly open and fully Thread/Matter compatible than actually doing it. What am I referring to? Tado X uses the Thread wireless standard. It…
-
Replacing Honeywell CM67i
Hi, I'm trying replace Honeywell CM67i with Tado, but I can't find correct cable.