-
Why is my downstairs not heating after installing more TRVs?
Bit of a story here. Bear with me. We initially bought the smart thermostat along with the extension kit for the boiler and the internet bridge. We previously had no thermostat at all so we’re very pleased with the control this gave us. However, we also have a log burner, so when that was lit, the thermostat picked up lots…
-
Set ST to override ?
Hey. How do I set the smart thermostat to override the smart radiator valve in the room it’s in? As example I have both currently in the hall. I set the smart thermostat to come on manually but the smart radiator valve is set to off so the radiator in the hall never came on? Obviously id like the opposite too which is…
-
Central vs Local Schedules
I have recently bought a tado system, where i have a central thermostat connected to the boiler, and radiator thermostats on each radiator. What i would expect to be able to do is set a central schedule / temperature settings and then this would propagate into the radiator thermostats to keep each room set to the current…
-
Smart thermostat plus smart radiator thermostats - centralvarme anlæg
I have a room “room1” in this room I have several smart radiator thermostats controlling the temperature, but I wanted to control them and measure the room temperature at a central location rather than at one of the radiators. Therefore I purchased the Smart Thermostat hoping it would work as a control for the smart…
-
Extension kit and thermostat
Hi .. having issues getting my tado to work. I keep getting the below message. Any ideas?? Take a screenshot Boiler unit must be driving a heating unit Totally lost
-
Hot Water _Extension Kit
Ok I have just purchased and installed a smart thermostat and extension kit for my newly installed Weissman system boiler which is working ok but not got my head around the schedules yet. The problem I have is the newly installed unvented hot water tank is on the 3rd floor and very difficult to get a cable to the stat.…
-
Extension kit
I previously had the TADO thermostat working fine wired into my boiler. I replaced it with the extension kit so that I could fit the thermostat into another room. All devises are showing connected on my app but when I try and change the temperature it’s not changing the boiler. I contacted TADO and they said they would…
-
V3+ "Upgrade" = No auto assist
I just upgraded my V3 app to the V3+. I now see that functionality has been taken out such as heating indicator and you can no longer swipe between rooms (I can live with this) On top of this, I am reading that whilst I had geo fencing included in the Tado V3 app I somehow have now agreed to a subscription base for…
-
App V3+: where is the heating on indicator?
I know this is a stupid question. In previous version of the APP there was a symbol telling you is heating was requested or not. I have upgraded tonight to V3+ and the indicator is gone and no where to be found. So, how do I know if the heating is being requested or not?
-
Safety Precaution
Hi, Is there any way to disable the alteration of temperature on the radiator valve to prevent a child from altering the temperature. I.e. disable manual control and only allow from phone or wall operated thermostat?
-
cast iron radiators?
Do the stats work with cast iron radiators?
-
multi radiator room
I've just installed a Tado system to run heating and hot water for the house and all is working fine. However, as part of the system we have installed, we have one large-ish room which has two radiators, each of has been fitted with a a Tado Smart TRV (so two in total in that room). Is it possible to pair them so that they…
-
TV interference.
Anybody else getting interference on TV when nearby Radiator Valve opens/closes?
-
Is a Home and Away Toggle Under Active Development?
Is anyone from Tado able to confirm or deny if a manual toggle for the Home and Away mode is on the development roadmap? I accept that as I am using V3, I will have to pay for geofencing. However, if a toggle is not under development then I will probably look at an alternative product.
-
Why is Tado app asking for permission on my camera?
I am stunned by this.
-
Boy Roth
Bøy Røth
-
Tado <> Apple Homekit: temporary heating change issues...
Hi, Has the Apple Homekit integration changed massively? Changing the heat via Homekit used to alter it until the next scheduled change in heating. But now, changing the heating via Homekit changes it for whenever someone is home... This means that when making a heat adjustment, it changes forever unless someone…
-
Google
B)
-
Tado technical
I started a chat with tado help about 3 o clock as the extension wasn’t cooperating. I’m still yet to get a response. I had to put all the heating back to original controls so effectively have worked for nothing and got to go back. How long do people generally have to wait? I also started a chat on 3 different devices to…
-
Underfloor heating and boiler control
Is it possible to use a single controller to connect both to a boiler control and underfloor heating at the same time. I.e. it can call for heat from the boiler and also turn the underfloor (electric heat mat) heating on for the room? The connections are both there, but unsure if it will cause any issue using them at the…
-
Multizone, multiroom underfloor heating.
hi all, my tado is only few hours in service, and i am starting to think how to control temperatures in each rooms. I have a boiler which tado is switching on and off. Hot water is then running trough circuits in rooms. Each circuit has own valve. I was looking at thsese scheme and thinking more. Can i use these principle…
-
Does a Tado Radiator Valve close straight after reaching set temperature?
I have a Boiler which requires one Radiator to be permanently 'on' so as to allow the boiler to circulate water down to a given temperature - normally takes about 2/3 minutes after last device has turned off. Does Tado compensate for this i.e. valve stays open short period after Boiler control thermostat has turned off the…
-
How to fix massive temperature overshooting?
Hi, now that the colder season is coming, annoying issues with my tado system are coming up again... The main bathroom (2 radiators, both with smart radiator thermostat, it is quite a large room) has a schedule to heat the bathroom in the morning and evening to 22'C. You can see this on the top chart. Tado heats to the…
-
Getting support - response times?
I've just purchased 21 x TRVs, 2 x smart stats and an extension kit but I've run into issues with the second box of TRVs in that I can't complete the set-up as the TRVs can't be assigned to a new room. The message in the app just tells me to contact support, which I've done last night, but it's a bit frustrating to have…
-
V3+ App purchase
Hi - I have V3 App but would like to upgrade to V3+. I have tried to press the button on the App, but it does not work....please let me know how I can upgrade......thanks.
-
Can I switch display on radiator stat from horizontal to vertical?
Hi, I purchased 21 radiator valves this week but unfortunately, the single one I purchased has a horizontal display rather than the vertical one. Is there any way to re-configure them or do I need to return and replace it with the a vertical one? Cheers, Ross.
-
Release history and features
Just looking at the iOS release history and I'm kind of astounded how little has been added. In the last 12 months since 5.2 I see Redesigned homekit UI Recommendations of when to open the window for indoor air quality Automatically return to schedule at the next time block Smart AC support Pollutants near you house To me,…
-
Tado extension kit not connecting to boiler
I have no heating and the boiler is on standby - the extension kit has been reset but the boiler comes on for seconds then goes off. I've asked tado for help but they told me to take a photo of the wiring, that was fine so they told me to reset it and that's it. I can't screw the cover back now but I can click it in and…
-
Tado extension kit not connecting to boiler
I have no heating and the boiler is on standby - the extension kit has been reset but the boiler comes on for seconds then goes off. I've asked tado for help but they told me to take a photo of the wiring, that was fine so they told me to reset it and that's it. I can't screw the cover back now but I can click it in and…
-
The static?
What do the different colors in the statics mean?