I've switched from the V3+ to Tado X due to connection issues with the bridge. With V3+ in the app I could select how long to boost my hot water for with the pencil, this was a vital feature for me. W…
Dear Tado team, I would like to propose an improvement that I consider useful for many users: the possibility of including fixed costs and taxes in the calculation of total energy expenditure. Current…
Currently the Smart AC control turns on the AC unit at the start of a time block, regardless of the temperature. In my opinion that's a major flaw, because most (all?) home AC units still run their fa…
Would it be possible to do the same for Ebus controlled boilers via the wired Tado, +- settings? My Vaillant can ramp up to 80C if it wants even if I set the max temp lower on the boiler. The ebus wil…
Tado publishes a public roadmap here which is commendable for a heating technology company, but expected for a disruptive tech company. However, the rate of updates to the roadmap is particularly low,…
Please add an off until resume schedule within the room tabs, so when an individual is away for a night or the weekend, one room can be turned off with one click. If this could be set to resume after …
I have used my Tado V3+ thermostat to replace an old fashioned binary thermostat. Love the features but find the 3 'wiggly lines' levels of heating very frustrating (and slow to heat rooms). Would it …
Buonasera chiedo di poter impostare su ogni testa termostatica la temperatura di mandata nel calorifero per tutti quelli che non hanno il protocollo opentherm in modo tale da regolare automaticamente …
Im fairly new to Tado but one feature i've seen that is so blindly obvious i though i was doing something wrong. It would be great to have a tile on the app which shows if the wireless recevier is act…
I am often away from home. My underfloor heating has a 24 hour thermal lag from 6 degrees to 22 degrees. I regularly forget to preheat it. Can you please add a facility to diarise a temperature boost …
This heatpump comes with the plugwise Anna thermostat using the opentherm protocol to control most combi-boilers, so they control the heatpump and the combi-boiler, but one must remove the Tado thermo…
Tado like devices often get repurposed into not conventional ‘homes’, such as canal boats and Rv’s Could the home location be made dynamic either using data from the home network ( our teletonica rout…
Edit from tado°: available with tado° X Original post: Please can you add support for more than 25 devices and only 10 rooms, with a 5 bedroom house, with ensuites with a number of downstairs rooms, 2…
I used to use IFTTT to boost my heating to 21 or 22 degrees for 1-2 hours depending on the setting. It was WAY more useful than just 25 degrees for 30 minutes. Tado removed the integration, but could …
Hi, I think it would be useful to have a "night mode" with a setting in temperature. With the other modes, away and home can be set as a scene recognised by alexa, Google home. So we can stop heating …
I live in Scandinavia and often work from home, so I have a consistent heating demand throughout the day. When looking at the temperature/heating graph view, it is clear that the heating demand (and t…
Yesterday, as reported by tado GmbG Inicident, there was a temporary degraded performance affecting the tado app. Just to inform you how this incident may have affected my Panasonic Aquarea heat pump …
I have now had the tado system for nearly a week, and its certainly better than my old hive system. You guys have done a good job on it. However you (and every competitor) are missing what I believe i…
Overview: I’d like to propose a feature that allows users to set a "Global Off Time"—a hard cutoff time at which all heating devices in the system are turned off or reverted to a predefined safe state…
There is no facility to specify what type of heating system is installed. It appears Tado treats all systems as if the heating system is based on radiators. In case of a underfloor only system it is l…
I have multiple tado radiator thermostats, but all of them are a couple of degrees out with the actual temperature. I use an Aqara temperature sensor to measure the actual temperature in the room, fur…
Una sencilla forma de saber si se ha puesto en marcha la calefacción en nuestra casa (o en una estancia de ella) a través de una notificación al móvil (tira o globo) especialmente si nos encontramos f…
It can be useful to have the option to set the perceived temperature instead only the normal temperature. In the high humidity zones temperature is not significant. It would be nice to trigger the air…
You offer nearly everything except a way to turn a underfloor heating pump on or off. My living room thermostat is connected to the underfloor heating, and to control the pump I have to set up a compl…
Very frustrated to find I have lost the ability to set a temp of 20.8° in the app. 20.5° too cool, 21° too warm - but those are the only options now. Why has this been changed?! It worked fine before!
When in graph mode, one can change the date range with the ˅ symbol next to the date. It would be so much easier to switch between rooms if there was a ˅ next to the Room/Device name as well. Now I ha…
If the temperature is adjusted at the radiator valves, that new temperature remains set until someone adjusts it again or until someone chooses to go to the schedule at the next schedule change. I wou…
