-
Feature proposal
Hello I have a Smart Thermostat X from your company and the problem is that it turns on and off too frequently (every 10 minutes). Why don't you add a feature in the app: if I set the room temperature to 23°C, it should go until 23.2°C (or whatever I want, +0.1, +0.2, +0.3) so that the heating system would run much less.…
-
Verwarmen voor thuiskomst
Deze feature, die bij afwezigheid zorgt dat je huis weer op temperatuur is als je thuiskomt, werkte in V3, maar is in X niet beschikbaar. Zou prettig zijn als die z.s.m. wordt gerealiseerd.
-
Firmware for Tado X thermostat with matter
Hi, i’m new to the Tado club. I only have a tado X thermostat to connect to my opentherm installation. I’ve connected the thermostat to my HomeKit house and that works quite ok. Thermostat is running firmware 64.0. Is that the latest version and how do you update firmware without a tado router? I only have the new…
-
Lost connection with some of my Smart X Rad Valves
Overnight my Wireless X Receiver with firmware version 249.1, lost connection with all the radiator vales it was connected to. The valves connected to my Bridge X were fine. I restarted the Wireless X Receiver and all the valves reconnected. I then had to restart the Bridge X as it lost connection with its valves. All now…
-
Tado X, is "Return to Schedule" possible via the Apple ecosystem?
We tend to use voice commands to alter a room temperature if we just want a bit of a boost. With v3 and Google Assistant it was possible to set a Google Home automation to "Return to schedule" as part of a Goodnight routine to ensure no overrides were left heating empty rooms. When we switched to the Apple ecosystem Tado…
-
ATAG Economiser Combination Boiler with Tado X
Hello Tado Team can you kindly advise if the Gas combi boiler ATAG iC39+ will be compatible to work via Opentherm with the TADO X range (a combination of wired and wireless thermostats). Many thanks Manuel
-
Tado X and 2-zone Central Heating
Hello, my current place has 2 heating zones. Upstairs and downstairs. How will it work when installing Tado X? Do I need to remove valves or can I wire so it operates as a single heating zone, which then is split between thermostats / TRVs? Also interested to know if this kind of setup would cause issues with OpenTherm…
-
Tado X Offline
So I woke up today and found my whole system offline, I've tried resetting / factory reseeting everything to no prevail. Really not sure how to continue is this common with other users I am thinking of returning as I now have no way of controlling my heating in my house. I thought buying the tado x with matter support…
-
Tado X devices randomly dropping off the network
I replaced my legacy Tado system with Tado X and I realised, that my devices randomly drop off Thread network. Never had that issue previously. Same location of bridge and end devices. They just drop off randomly but usually at least a couple of devices are offline. They are not even the furthest away devices from the…
-
Can't remove wall stat X from mounting plate
I wanted to reset a wall stat today by removing the batteries and could not removed it from the backplate. It unclips at the bottom ok but will not come away at the top. I have four and they are all the same. It seems as if I apply any more force it will break. Has anyone experienced this and found a solution? Is there a…
-
Tado X
Can you please advise if the Tado X product is suited for our situation. We want to urgrade and better regulate our hot water and heating. We live in a 5 bedroomed house, currently it has 18 Radiators, 15 of which have old TRVs. The boiler is a Potterton Ultra with a separate water tank (Megaflow Cylinder). We have 1x…
-
Tado X radiator thermostat “unmounts” from radiator
So I’ve experienced this twice now in 2 different rooms. The thermostat suddenly thinks it is not mounted and the heat just rises like crazy. No one touched the thermostat or made any manual adjustments or anything. Only “warning” I get is looking in the app and seeing that a room is set to 20°C but actual temperature is…
-
Terminal block broke off
Hey everyone! During the installation of our new Smart Wired Thermostat X last night, the relevant terminal block broke off and the insight seems slightly damaged (see pictures). Is it possible to replace just that part? It seems to be a removable one.
-
Suggestion for Tado App: Ability to rename "Other Devices"
A suggestion for the next Tado app update from my side would be the ability to rename the individual Tado X Bridges and Tado X Receivers in the same way it is possible with the Smart Thermostats. Since i have two bridges and 6 Wireless Receivers (multizone setup) it gets tricky to know which one is which one without having…
-
Tado X - Month 2 Review / Feedback Needed.
Hello, Having been a Tado customer for 4-5yrs, and vocal about the lack of additional bridge support for the v2/3 platform, i jumped on the opportunity to upgrade to X to finally solve connectivity issues around my home. Now that i've been using X for 2 months, here is an honest summary of my experience, and some issues…
-
Problem with programming in different rooms of the house
I have purchased a smart thermostat and two smart thermostatic heads tado X, as well as a bridge. The smart thermostat is located in the living room, and the smart thermostatic heads are in two bedrooms. The temperature schedule is the same for all three rooms. The problem I have is that when the desired temperature is…
-
Tado X with Combi Boiler mix traditional tVRs and Smart TVRs
I am looking for some advice, I have bought the Tado X wireless starter kit along with two smart TVRs. My plan is to have the two tado tvrs in the kids bedrooms controlling their radiators whilst the radiators in the rest of the house is linked to the tado receiver thermostat without smart TVRs, see below a diagram showing…