-
Timed off period
Following the easing of lockdown, we have been lucky enough to get away for a few days. The system went into away mode as expected but I noticed that the heating was coming on to maintain the lower away temperature - I don't like it too cold under normal circumstances. I didn't want to heat the house at all while we were…
-
Reduce expansions tank "delta" - Control radiator valve change speed or spread open over time
Living in the Nordic countries it's quite common (due to regulation on energy consumption for households) that you end up with some type of heat pump, to power your radiators. Many of these comes with an expansion tank as the "interface" between the pump and the pipes in your house, and is used for regulating the ups and…
-
App : dark mode
Do you plan to provide a dark mode compatible app ? When ? Thank you for my eyes.
-
tado AC: Alert if temeperature risses over certain threshold
Hi, I would like to use the tado AC for a professional purpose to control and monitor the temeperature in a server/computer room. It'd be be helpful to receive alerts if the temperature rises above a certin threshold so I know if a) something might have gone wrong (e.g. power cut) or b) in summer I can intervene remothely…
-
VA03 Smart Radiator Thermostats support a charging port?
Will the next version of smart radiator thermostats include charging ports? Will make life a lot easier. I'm stuck with VA01's. Unless there is an introductory offer that I can't refuse I doubt if I'll change them. If I did I'd die happier if they had charging ports 😕⚰️😌
-
Quick Key in App For Window Opening
After the great addition of the quick keys in the app for operating the heating system controller. it would be useful to have an extra button added to tell the system that a window is open and to auto shutdown the heating. Although, this is automatic feature in the app, it does not always recognize that a window is open…
-
Moved: Nuevas funciones de AC- Control de Climatización Inteligente V3+
This discussion has been moved.
-
See which room is calling for heat on home page
You can see which room is calling for heat by going in to the room and seeing the wavey lines, but on the main home page, there is no clear indicator as for which room is calling for heat - just a colour indicator for 19 degrees and above (yellow) 18.9 and below (green). This can actually confuse things as yellow could…
-
Utilise more tile space with humidity info / easy cycle between rooms
I quite like seeing the humidity in each room as well as the temperature. Currently the tiles only show the temperature meaning i need to click into each room individually to see the humidity. One of my rooms i have particular humidity issues so it would be nice to see an overview of how things are looking. With all the…
-
More data on tiles in app
Lots of free space on room tiles in the app, to display valued information if needed. Why not add icons for heater power level, scheduled off, or open-windows detection status ? Should be useful to get a very quick overview of the system.
-
Manual control improvement
A really useful feature would be a variant on the manual control, so you can set a temperature on an ad hoc basis that is to be reached in a set number of hours. For example, 20C to be reached two hours from now, and Tado would automatically turn the heating on at the right time for that temperature to be reached. At the…
-
Don't completely disable a room from remote control because 1 device has fallen over.
I searched but failed to find similar though I suspect it is here somewhere..... In a room where there are multiple tado devices (my open plan ground floor has 1 thermostat and 3 trvs) if one device becomes disconnected the entire room is impossible to access. This seems mad. I can't find out the current temperature…
-
Night time shut off overrides all
Would really like to have a feature added where you can select ‘Night Time’, which when turned on, overrides all heating options via its adjustable time settings. There have been several occasions when either my parter or I have turned the heating on at the main thermostat and completely forgotten about it until we hear it…
-
Face ID Child lock on App
Hi although the child lock on Smart Thermostats is good we still have a grandchild that likes to change the App! Is there anyway you can make this childlockable as an option with Face ID?
-
HomeKit Information From Tado
Hey I'm about to purchase Tado for house I'm currently getting build. And from what I've read online, Tado works with HomeKit for adjusting the temperature of the thermostats etc. Just wanted to know from what I can see the Tado app displays things like the Humidity. Is this something that also displays within HomeKit? If…
-
Room exit time (opposite of Early Start)
Just thought I'd throw this idea out there.. Just like the early start feature (which I know doesn't work well) that heats a room for a set time.. I would like to set an exit time to turn off the heating before I leave a room to save energy. I used to set my lounge temperature to 21oC until 12am which is exactly when I…
-
Symbolic names for temperatures
I tend to use the same temperatures on different rooms, eg, 21, 18, 15, 5. These are input manually and sometimes I make mistakes. It would be good if I could set up names like warm 21 cool 18 cold 15 freezing 5 and use these as alternatives for numbers.
-
Make Quick Actions more specific
I like the idea of the Quick Actions although the boost action would be much better and more useful if it were to be applied only to the rooms that are actively heating in the schedule at the time the boost is applied. I don’t want to be boosting the whole house when I’m only using the lounge or downstairs. Can this be…
-
6 months subscription pass
Hi tado° team I’m wondering if you will ever offer a 6 months plan to match how long the hearing season lasts. Yearly plan wouldn’t be used for a good half of the mine and monthly plan would risk to cost a hefty 50€ if you forget to deactivate it what about a 14,99€ 6 months plan? thanks
-
Heating Time Per Room
I suggest that instead of displaying the percentage of time, that each room is being heated, that it would display the actual time in hours and minutes, that each individual room is being heated.
-
Custom mode for Smart AC Control
Hi I have just bought this Tasdo Smart AC Control to control my Electrolux heap pump and it seems to work ok. BUT my heat pump has an anti-freeze mode where you can set it to fixed 8 degree C, to keep your house above freezing temperature when away - but this is not supported by the Tado device. I suggest to add an extra…
-
Graph layout
Hi Tado team, I have graph idea for ease of view, when the graph for heat and humidity is showing you can view previous days by sliding left and right, the update idea is to view the other locations by scrolling up and down instead of coming out of the tab.
-
Ability to move All Off/Boost buttons
Can you please make those two new buttons moveable? I would seldom use them, and they are prominent, and easily activated by accident. Thanks
-
Why US English used instead of UK English?
Why is US English is currently more acceptable to use both in Europe and wide community than UK English? Surely English or the queen’s English should be more appropriate to use than non original and corrupted English that the US use. Imagine France or Spain having Canadian French or Peruvian Spanish used instead of the…
-
Allow users to group together TRVs in different rooms
Hi. The fact that we can use IFTTT, Google Home , and some homeassistant features to do this tells me it cant be that difficult. Most houses in the UK have 2 floors - upstairs and downstairs. Most of us want to heat only the upstairs at night when we are going to be there, and the downstairs in the day. Currently I have…
-
Locking Schedule and other parts of the system
Hello, I have a system with 6 rooms all on different radiator controls, in my house, there are 4 people who have access to the app to allow them to turn the temperature in a room up or down and who are part of the Geo-fencing for the heating. The only downside of providing them with access to the Tado App is they can…
-
Implement Quick Actions as iOS Quick Actions
Right now Quick Actions are not of great use to me, as I still have to open the app, thus, not very quick! The next logical step would be to add them as iOS Quick Actions from the iOS Home Screen
-
Android & iOS Widget
Now that iOS also supports widgets, it would be useful to be able to have widgets on both Android and iOS phones so that you can set the temperature for a period of time. For example: Set the temperature in the widget to 23 degrees for 15mins
-
Open window detection - globally turn off the heating.
It seems silly (at least in a small-medium sized semi-detached house) to have the central heating still running when Tado has detected an open door/window. It may close the valve on the radiator(s) for the room, but the heating is still running throughout the property and as such wasted energy. Would like the option to…
-
Naming
The problem with the tado system is actually that it is made for 'simple' and 'standard' set up. Once you move (one step) away from this 'standard' the tado system gets a different configuration. My example: a boiler and two valves that independently heat the ground floor and the first floor. Using a tado system then the…