-
TRV going into manual mode all on its own.
When I go out for a while I set the system into 'away' mode and all eight TRVs go into frost protection mode. A while later (variable) one of them (always the same one) goes into manual override mode and turns that room back on. This is clear when the temperature graph for the room is examined. No one is in the house to…
-
TADO X without Tado App/Bridge/Cloud...
Hello community… Assuming that I have a thread border router already, and have a home automation controller that speaks matter. (In this case, a Home Assistant Yello). Can I just add a Tado X device to that, and use it without needing the Tado app/Cloud? Asking because if this works this would offer a migration path from…
-
V3+ users can now request Offline Schedule
Dear community, We are happy to announce that, as part of our ongoing tiered rollout, the V3+ Offline Smart Schedule is being made available to interested tado° users via the community forum. Due to compatibility considerations, this offer is only available to community members with V3+ heating starter kits or add-on…
-
Early Start learning (Tado V3+)
We have a room which takes over 3 hours to heat up if the outside temp is below 2C and then it may not hit target in that time. Here in the UK during the recent very cold weather, I have been boosting the room heating with a fan heater for an hour or so to get the room up to temp, then the radiators are able to maintain…
-
Please, can anyone tell me why?
So I'm fine tuning my heating, and set my lounge to begin heating if the temperature falls below 16 degrees. I'm sitting here, it's 16.6 and warm enough for me right now, but the tado wired thermostat just turned on the heating. Why please?
-
Usage of HT-Bus (D17) for Worcester Bosch
Hey, I'm going to purchase heating & hot water control for my home which has a Worcester Greenstar 30CDi Classic Regular ErP boiler. I currently have a hot water tank and a honeywell programmer and wall thermostat. I don't believe the boiler supports OpenTherm. So is the wireless starter kit suitable for controlling both…
-
Individual temperature settings
It would be really good if you could have temperature profiles for each person and then one for when there’s multiple people home. I have my schedule set up so my partner is t cold, but I always turn it down when she goes out and I’m home. It would be nice if taco would see I’m home alone and reduce it to the temperatures…
-
Weird goings-on this morning – App/Internet Bridge/Smart thermostat - what's happened?
Got down for breakfast to find the room a bit chilly. Checked the app to find the dining room online but all other rooms offline. How can that be? Changing the temperature in the app had no effect so went to the main, smart thermostat. Upped the temperature manually and the heating came on. But the thermostat showed low…
-
Baxi System 100he boiler
I'm thinking of buying Tado V3+ Wireless Heating & Hot Water Smart Thermostat Starter Kit and Smart radiator valves. Does anyone know if they are compatible?
-
Replacing Myson MPRT with Wired Tado – Second Wireless Zone Compatibility and Setup Questions
Hi everyone, I’m planning to upgrade my thermostat setup and recently purchased the Tado Wired Smart Thermostat Starter Kit V3+ to replace my wired Myson MPRT (in the living room). The wired Myson is currently not working and controls the heating for the living room, kitchen, hallway, and bathroom. In addition, my bedrooms…
-
How to supply power to the EU opentherm receiver in UK?
As title states, how could one supply power/wired the EU opentherm wireless receiver in the UK for modulation? I understand it comes with EU plug already attached according to the description. I have three basic ideas, though one may not be all that smart/safe, idk 😂 1. Just use an EU to UK plug adaptor. 2. Actually have…
-
Need help with tado°
I'd like to describe my newest experience with Tado support. I have some problems with hot domestic water - it gets heated to too high temperature. What feedback I got from Tado representative: "That may be the reason the OT connection is not fully compatible. An installation tado° Smart Thermostat directly to your boiler…
-
New/Old system problem
I've just bought a complete system from a neighbour who gave up on it. I got it for a song, but I am having an issue with it. I bought it and set it up a while back, can't remember exactly when (maybe 8 weeks), but I did so because I'm going away for a couple of weeks and wanted to set a couple of rooms to stay at a set…
-
Room no longer getting up to temperature
Before Christmas I installed a wireless Tado thermostat to control the whole house. It worked fine but I wanted to be able to control the bedrooms separately so I don't heat them during the daytime. To do this I bought four smart TRVs to fit on the upstairs bedroom radiators. Since fitting these I've found the system not…
-
Hot Water Turned On Outside of Schedule
Hi Everyone I have just completed my Tado Wireless V3+ Installation with the bridge, wireless thermostat, wireless receiver and 5 TRVs. I followed the installation settings exactly. I have a Y-Plan system with a heat only boiler and a Hot Water cylinder. The HW cylinder has with a Cylinder Thermostat which is set to 65c.…
-
Short-cycling boiler, any fixes?
No responses to my previous "New/Old system" query, so I must therefore assume what I am experiencing is 'normal' behaviour. I will try to learn to accept the wildly inaccurate timer switching. So I will ask another question, assuming again if there are no responses, it is again, 'normal' behaviour for Tado: *I turned on…
-
Heating randomly stays on and exclamation mark present!
My Tado V3+ system and TRVs have been fitted for 3 months with no problems. However, on a couple of occasions the central heating will remain on past the thermostat set temperature. The heating then remains on no matter what I do, unless I hard reset the Tado sender unit in the airing cupboard. I also notice that the…
-
CALDAIA IMMERGAS VICTRIX TERA V2 28kw
Vorrei capire se posso collegare tado v3+ alla mia caldaia immergas victrix tera v2 28kw in modalita di modulazione utilizzando le uscite digitali OT (opentherm). l'assistenza Tado dice di no ma qualcuno sembra esserci riuscito.