-
See which room is calling for heat on home page
You can see which room is calling for heat by going in to the room and seeing the wavey lines, but on the main home page, there is no clear indicator as for which room is calling for heat - just a colour indicator for 19 degrees and above (yellow) 18.9 and below (green). This can actually confuse things as yellow could…
-
Make Quick Actions more specific
I like the idea of the Quick Actions although the boost action would be much better and more useful if it were to be applied only to the rooms that are actively heating in the schedule at the time the boost is applied. I don’t want to be boosting the whole house when I’m only using the lounge or downstairs. Can this be…
-
Manual control - Turn-all-on/off (boost) timer - Away Mode timer/datePicker
I quite liked your Turn-all-on/off feature, but I am missing a specified time - the same way as if you manually set a temperature to a room, so for example 2h, 5m... Also the same way with the manual AwayMode - there it would be usefull a calender/dateTime picker. Thanks! Jaroslav
-
Notification when heat is turned back on automaticly
Hi. There is the feature where you'll get a notification if there's an open window and then you can click the "turn of heat", the heat stays of for a period of time and then on. My request is a feature that makes it possible to get a notification when the heat then turns on again - so that I know to close windows/the heat…
-
Support for multiple people and multiple zones
With current geofencing, if all devices are away from home all zones are set to away. If at least one device is at home, all zones are set to home. Ideally, this should be more granular. As an example: We have two devices, mine and my partners. We have four zones: my study, my partner's study, a shared bedroom and a shared…
-
Need a meter for hours heating was on
Living in a block of 8 flats, we all tap on central petrol heating. We get charged by the hours we have heating on. No information In the daily room graph (have only one thermostat) there is no indication of the time heating was actually on, from start of month / from start of day till present. Is something so obviously…
-
Oventrop 1011450 - Bulk Purchase
I am sure you are aware that the above elbow adapter is proving a success for the few using them. How about you arranging a bulk purchase from the German Firm in order that we may buy from you? For anyone who has not read the thread on this, the above link for Amazon shows the adapter which turns an upright tado TRV into…
-
Changing the maximum flow temperature myself
Initial problem: Hello, i have a Ferroli Bluehelix PRO 32C heating central. I use tado for 3 years now. After last update of Tado APP to version 6.0.2 (9826) i found following bug. I limit maximum temperature of heating using heating buttons on my boiler to 55C. After this update, maximum flow temperature is reseting…
-
VA03 Smart Radiator Thermostats support a charging port?
Will the next version of smart radiator thermostats include charging ports? Will make life a lot easier. I'm stuck with VA01's. Unless there is an introductory offer that I can't refuse I doubt if I'll change them. If I did I'd die happier if they had charging ports 😕⚰️😌
-
Allow rooms to be excluded from the 'Boost" option
I already contacted TADO support and had this conversant with the support agent, they advised me to create a query here as an "Enhancement Request" Basically, my scenario is; I have a large house and my kids would usually go to school between 7am and 5pm, I personally stay in to work from home along with my Mrs. When I ask…
-
Always on display option
Hi just installed my wired v3+ very easy instal and instantly impressed. One suggestion would be to have the option to keep the temp display always on so you don't have to press everytime to view current temp.
-
A Hot Water Boost button in the app
There is no option in the Tado app AT ALL to switch your hot water (only) on for a predetermined time - e.g. 30 or 60 mins. SO many times I've needed extra hot water, outside of the my usual / programmed schedule and at irregular / varying times of day, so I've put the hot water on manually and then forgotten and it's been…
-
App Ideas - 'call for heat' alignment
Issue: my heating is on a lot through the day. I'd like better visibility of when the boiler has been triggered (called for heat) and by what. And better control so I can (or the system automatically will) try to align devices calling for heat (so perhaps 3 devices call for heat together for an hour, then all go off for an…
-
Worcester Bosch Greenstar 8000 and EMS
Please can you configure the Tado wired unit to work with the Worcester Bosch Greenstar 8000 and EMS
-
Add Zone Control switching to schedule . . .
It would be useful if the zone controller / non zone controller switch could be made a feature of the schedule. There are times here when I’d like to heat a room individually (because no other rooms are on then and it needs to be able to call for heat) but for all it’s other “sessions” the rest of the house is being heated…
-
Simple UI improvements
Great system, nice app. Here are my suggestions on how you could improve the user interface (UI) in the mobile app for better usability and utility. In order of impact to the experience: Show humidity readings for each room on the Home view tiles - this would give more utility than the current solution - having to tap down…
-
Personalised Boost heating
Is there any chance to personalise the boost heating option? Option to program time and temperature for the "Boost heating" would be useful feature
-
Calendar
Please enable to set future settings, eg. for planned holidays.
-
Indicate which device is the measuring device for a group.
When looking at devices in a group (room) could you highlight the one that is the measuring device (master), as distinct from the others (slaves)? This is under Settings > Rooms & Devices and/or place the measuring device at the top of the list.
-
Heating status for On/Off mode
I would prefer to see the heating status as a simple on/off symbol rather than the three waves. I have a heating source that does not support opentherm and thereby only works in on/off mode. Why I would need this: This would be useful to really check if my heatpump is working properly: I currently do not always know for…
-
Always On Display Thermostat
The option to have the display shown as always on with further options to also be able to dim or brighten it. The option for it to show current room temperature/set temperature/humidity and also possibly time and date.
-
Air source heat pump linked to UK's Octopus Energy Agile Tariff
Tado should add the ability to heat up the water cylinder using an air source heat pump based on the cheapest energy rate of the UK's Octopus Energy Agile Tariff. This could save lots of £. It would need some AI or the like to spot what is likely to be the cheapest rate for the day, though that may be quite stable and for…
-
more than one property
It would be so helpful if one could flip between two different places, each with the Tado system installed, without having to sign out of one account and into another.
-
Set max temp for manual
There is currently a feature for auto stopping manual overrides on radiator valves but there is no option to set the max temperature allowed. My kids keep turning up the temperature to max. Can you consider adding a max temperature setting.
-
Integration for Samsung SmartThings
It would be great if we Tado users could connect Tado to Samsung SmartThings
-
Tado Outdoor Weather Station
Develop an outdoor weather station that would be a similar design to indoor Tados. The product would track temperature, pressure, humidity etc. Could be a stand alone product for people that don't have Tado or a crucial part of the Tado eco-system for those that do. Failing that, partner with a leading weather station…
-
Hot Water control in Apple Home
Please enable a Hot Water control in Apple Home.
-
Make app developers to have multi homes into one account
Many Smart home Apps have multi home capabilities, for example my Kwikset App or My Tapo App allow me to control smart door locks or cameras in two different homes. Hence, this is not rocket science is an easy fix for the Tado App. So I hope is done soon
-
aircon control should be battery powered as per thermostats
I am disappointed that the aircon control needs continuous mains power and not battery as per thermostats
-
IFTTT trigger when termostat valves open, closes or passes a certain threshold
I would like to be able to make my smart home turn off my heat pump, when the desired temperature has been reached in the house. I currently use temperature thresholds, but it would be much simpler if Tado could trigger via IFTTT when valves on my thermostats open or closes. So bacically, a trigger if room "Living room"…