-
Allow users to set heating parameters to reduce pipe noises, energy drain, improve normal heaters
During my use of tado equipment I noticed the early start algorithm can start very early, heat the heater to 80 degrees, and occasionally really ask for a lot of power from the heater very quickly. Especially in older homes/older installations, this can cause issues: You wake up early when the heater wakes up, even at…
-
Valve pin position indicator
My Bosch system which I got rid of in favor of Tado included in the app a place where you could see the position of the valve pin. This was useful to determine if TRV was fully opening or closing the valve pin and other temperature issues. I think this would be useful on the Tado system as well
-
Open or close valve without controlling heating system
It would be nice if we could control the valve full open or fully closed without start/stop heating system. Example, i need a radiator always opened because of the pressure system and dont want it to control the heating system, just let the current water flow in.
-
Working Support
Here is a really novel idea. A support service that actually supports its customers! Having run into an issue, finding out that all support is now via the chat bot. Only to find that no support engineer has even looked at the request in nearly 48 hours. Disgraceful!
-
Recycle unused adapters
Hello. I haven’t needed any of the supplied radiator valve adapters, so I have 7 unopened packets. Be a shame for these to go to landfill. Many others must not use theirs. Can Tado offer a way to return so they can be reused?
-
indication that the heating boiler is running
on the app main screen showing rooms another box saying if boiler is active or not
-
Send notifications when firmware downloads taking place
Recently at 04:00 all my tado devices disconnected from the internet and all smart radiator valves turned to off. During the day various devices reconnected then disconnected again. On investigation I found the Smart valves were being updated with new firmware. On continuing tado I was told that firmware updates can…
-
Change the hysteresis / PID settings
Hi Tado. The current desire of the smart thermometer algorithm to track the set temperature is killing my hardware. It is turning it on/off so often that things are breaking (like TCVs). How about I can select the min and max settings that trigger a state change? Or if it is a PID system, I should be able to change the…
-
Set a manual time limit on Manual Away Mode to go back to auto.
Set a manual time limit on Manual Away Mode to go back to auto similar to the manual timer mode on the TRVs/Thermostats.
-
Manual override notification
Please add a mobile notification when the temp is changed or turned on . As it would be very handy. I have a autistic child who keeps turning the wireless thermostat on an we don't notice till its too late Thanks
-
iOS 16.3 HomePod Temperature Sensor
With iOS 16.3 HomePods can now relay temperature and humidity data to HomeKit. I’ve had trouble with the room heat being cold on one side, and the tado valve is near radiator… I’m using the HomePod for offsetting the room temperature, could this be automatic ?
-
Receive smart meter data
Either access smart meter data, or contact loop to share their access. Use this data to attribute costs to room schedules.
-
Selective boost
The boost all rooms is a nice option on occasions but what I’d really like to see is individual room boosts so if I’m working in one particular area I can boost the heating for a set period, say 15 mins without wasting energy heating the whole house.
-
TRV with empty batteries closes valve, but keeps requesting heat
The batteries of my TRV were empty and I received this email from Tado: > When your Smart Radiator Thermostat does not have enough charge to function, it will automatically close the radiator’s valve and the heating will remain off until you replace the batteries. Sure enough the valve was closed and an empty battery icon…
-
Enable Tado to use other temperature sensors via HomeKit
It would be very helpful if Tado could utilise existing temperature sensors that are also connected via HomeKit. I have several existing temperature sensors in my house(e.g. Netatmo) and don't want to have to buy additional Tado ones simply to get meaningful room values to control my heating. The smart radiator valves are…
-
Energy IQ to take account of hot water
I find the energy IQ quite useful but it would be so much better if it took into account the gas usage for heating hot water. Can this be implemented so that energy usage for hot water can be shown both separately and combined with heating?
-
Add max. valve opening on thermostats!!
It is crazy how my thermostats are often overheating causing a loss since the exiting water in my radiator is boiling hot. This is CRAZY EXPENSIVE - but app still calculates this as savings which is simply wrong. Add the functionality to limit water flow e.g 25-100%! Add the functionality to set max time on the max water…
-
Controlling heat pump for heating and cooling
By now more and more owners adopt air-water heat pumps to heat and cool their houses by water plumbing under the pavement, so saving energy respect to other solution. What is of paramount importance given the present surge of energy prices. Yet so far Tado has no solution for this configuration, notwithstanding it would…
-
Advanced smart scheduling
Many people work shift patterns that require a different heating schedule each week. Would it be possible to have advanced scheduling to cover multiple weeks? Ie the ability to set a heat schedule for one week, and then have it repeat every x amount of days/weeks? In exactly the same kind of way you set up repeat…
-
Auto meter readings
The App needs to access meter readings automatically if the Intelligent IQ is to be any good Apps like Hugo already do it, the Tado app should too
-
Longer graphs?
1) Show all devices on a single page in a graph 2) Show the graph as above but showing 1 week, 1 month etc intervals? 3) is there an external Tado device that can be installed to indicate the true outside temperature/humidity? 4) Can the graphs be printed?
-
Ability to rename device
When batteries are running low I get an email informing me that a particular device in a specific room has an issue. In some rooms I have 4 radiators. I then have to go round ‘blinking’ the stat multiple and watching all the stats in the room to find which one it is. it would be great to be able to rename or give a…
-
Store a basic schedule locally in case of crash / lost connection
My Tado system crashed when I went on holiday when the boiler was on. It stayed on max heating until I got home. Quick sums showed it had burned abut £50 in gas (which Tado refunded in the end) but surely it makes sense to store a limited schedule locally, at the boiler controller. What's potentially worse is if the system…
-
Smart AC Control to turn off AC unit when desired temperature is reached
Could it be possible to add a feature to the Smart AC Control that would allow for AC unit to turn off automatically when the desired temperature is reached, and then, when the Smart AC control detects that the temperature has raised 0.5-1 degrees over, to turn on the AC unit again? At the present moment, using the Smart…
-
Notification
Can we have a notification when someone turns heating on please.
-
Decouple from cloud please
All we want is to avoid this: https://arstechnica.com/gadgets/2022/04/shameful-insteon-looks-dead-just-like-its-users-smart-homes/
-
Naming radiators
I have a number of rooms in which I have more than one radiator but all connected under one Tado “room”. It would be good if each individual radiator could be named eg “under the window” so that one knows which battery to replace without having to say Hi to each radiator. This is particularly important when the radiators…
-
Boost by 5° not up to 25°
I have my heating relatively low but if it dips a few degrees and I want to boost it I don’t want to boost to the maximum 25. 5° more than the current temp would be enough. In this age of trying to be energy efficient and a fuel crisis maxing out the temp is illogical
-
support for multiple internet bridges
I've had contact with the support team, changed the location of the internet bridge 4 times, support team changed the frequency 4 times. Still I'm waking up to take a shower in 14° degrees with a child of 3 years old. This happens every day for hours at the time, connection gets losts and thus no heating. I'm now having to…
-
Energy IQ
Could you set it up So we can put the oil Price per litre. So we could use this function. It seems you are only thinking about Gas boilers and not oil. I’m sure there are customers who have oil and would like the same Benifits.We have paid the same price for out Tado products after all