Wireless Receiver + HW, LED status lamp
I wonder if someone could clarify the indications from the wireless status indicator on the receiver.
I recently had some difficulty with the latter when it stopped responding to commands from the app. I noticed the status lamp was pulsing slowly and despite a power down / up it continued to do this.
The Manual for Professional Installers at https://www.tado.com/start/manuals/st/Wireless%20Smart%20Thermostat%20Incl.%20Programmer%20with%20Hot%20Water%20Control%20Manual.pdf states "Solid on indicates succesful pairing" and this was what I was looking for.
However, the support article at https://support.tado.com/en/articles/3458303-what-do-the-blinking-states-on-the-extension-kit-indicate says "Slow pulsing/breathing: The Extension Kit is operating normally."
When the receiver was showing slow pulsing again this morning it was still not operating properly. A further reboot restored the steady status of the lamp and, I think, all is now well.
Could anyone advise about the conflicting information above ?
Best wishes,
Hugh
Answers
-
This content has been removed.
-
@GrayDav4276
Ah, you're absolutely right, I should have been looking at this article: https://support.tado.com/en/articles/4511179-what-do-the-leds-and-blinking-states-on-the-wireless-receiver-mean which confirms the normal state is a steady lamp. Thanks for steering me in the right direction.
Clearly then a "breathing" wireless LED on the Wireless Receiver indicates an abnormal condition but I've not been able to find a reference to exactly what it is. I should imagine it indicates loss of connection with the Bridge but the app. did not show this when it was happening.
Hugh
0
