w.Intercom = i;Room temperature set to 10c but is 24.7 what is wrong with room thermostat — tado° Community

Room temperature set to 10c but is 24.7 what is wrong with room thermostat

DavidGreenwood25
DavidGreenwood25
in General Questions & Topics

I have set to 10c room thermostat to 10c but is 24.7 what is wrong with room thermostat

Comments

  • Montage
    Montage

    You’ll need to provide clues.

  • Unknown
    Unknown
    This content has been removed.
  • samd
    samd ✭✭✭

    Have you set the room thermostat to be the measuring device?

  • Unknown
    Unknown
    This content has been removed.
  • YodasDad
    YodasDad

    I have the same issue. The wired thermostat is not switching the relay (the audible click). The stat correctly communicates with the hub and app, and knows the target temperature, but it is not actually switching the relay to control the boiler. In my case to turn the boiler off.

    I see others reporting similar issues on this forum.

    I have 3 wired thermostats, one is failed in this way, and it looks like a 2nd has the same issue.

    So I highly suspect a firmware update from tado has broken something.

  • Pr4g
    Pr4g
    Same, happend a week ago.
  • YodasDad
    YodasDad

    Yep mine was about a week ago as far as I can tell. I have underfloor heating so hard to pinpoint the exact time.

    But on the 28th March I see a day where the heating came on and continued to rise all day even though the heating should have switched off. So that seems to be the timeframe. Wonder if a firmware update was pushed on the 27th/28th.

  • Montage
    Montage

    Someone mentioned firmware on another thread. The version mentioned was over a year old.

Categories