w.Intercom = i;No remote access in two rooms — tado° Community

No remote access in two rooms

Boomba
Boomba ✭
edited March 2022 in General Questions & Topics

I'm getting a no remote access for two rooms that are furthest away from the bridge / router

Im guessing its due to the distance. is there anyway this can be resolved by any accessory etc?

Comments

  • NellyFurtado
    NellyFurtado ✭
    I had this problem on a regular basis and mostly fixed it with a metal coat hanger. Seriously...

    Jurian stated elsewhere on here that the tado bridge works best when it is in a vertical position so I set about making a bridge stand. I got a metal coat hanger and straightened it into one long wire. Starting at one end, I bent it into a circular shape about 6-8 inches in diameter which formed the base of my standby. I then bent it 90 degrees so that I got one long vertical that you can attach the bridge to. Depending how fancy you want to be you can just tape the bridge directly to that, or carefully make another circle at the top that molds around your bridge and use a bit of tape to hold it in place.

    It might sound a bit Heath Robinson, but since doing this the only dropout of any room I've had was due to a flat battery in a TRV. Speaking of which, must get some new rechargeable batteries for that!
    If you give it a go, I'd be interested to hear if it makes a difference. If it doesn't then sorry, as tado doesn't seem to offer any solution to this well known problem.
  • Boomba
    Boomba ✭

    Thank you. i'll give it a go. Got to be worth a try.

    Brian

Categories