-
IOS Home Screen Widgets
Quick glance/quick change widgets for room temps. Basically, the tiles we already have inside the app, but on the Home Screen.
-
All for one
Allow manual 'Turn Off All' to accept a temperature value.
-
Add 0.5 degree granularity to Smart Thermostat manual mode
0.5 degree granularity was recently added to the Smart Radiator Thermostat. I would also like to be able to raise the temperature manually by 0.5 degrees from the Smart Thermostat on my wall, instead of having to open the app.
-
Allow changing Hot Water “OFF” temperature
Currently, when hot water is “OFF”, the temperature sent to the boiler for hot water is 55 degrees Celsius. This temperature can not be changed on my boiler because the Smart Thermostat overrides it. I want to have periods in my schedule where hot water is “OFF” (so the boiler is not pre-heating water all the time), but…
-
Alexa commands
Can we please include the "boost heating" command in future Alexa integration updates?
-
second Temperature Sensor in same room
For large rooms TRVs don’t work well. If you could assign a second temperature sensor to the same room the localised effect of the TRV sensor could be counteracted and compensated for.
-
change "turn off all rooms" in an away button
how often do you turn of all rooms ? isn't it more likely that you want to activate away ? my suggestion is to move the home / geofencing functionality to the top and move the "turn off all rooms" to a tile below.
-
schedules that can be assigned to week numbers (for co-parenting)
When faced with co parenting, kids are typically away for a week and the next week they're back. During the off weeks, no heating in their rooms and their bathroom is required and that cost can be saved. In vacation time this scheduling can change, for example two weeks of and then back. So having the ability to make two…
-
Apple M1 app
Can the Tado app be made available in de M1 appstore please. It requires no additional programming, just allow it. We use apps like the ones from Millheat, Eufy Ikea,... on our iMac M1. This way everyone can use it (not everyone has a smartphone and the ones who have one aren't always at home)
-
SRV call for heat permission setting
I don't "live" in all the rooms of my house that have SRVs, therefore I don't care too much if the temperature drops below my set point. There are only two or three rooms I want to maintain at a set temperature, but some I just want to limit the heating to save energy. I don't want these less important rooms calling for…
-
Group Histogram
The app has some great features but one thing that would be great is a histogram of all temperatures on the main screen. Then at a glance I can see all the historic temperatures for that day/month and makes it easy to see if a particular room is getting to hot or not warm enough compared to the rest. Also the current…
-
Tweede scherm voor luchtvochtigheid
Ik heb nu meerdere kamers met TADO smart thermostaat knoppen. Deze worden netjes weergegeven met de juiste temperatuur. Aangezien de luchtvochtigheid een steeds belangrijker element is geworden in huizen die goed geïsoleerd zijn zou het misschien goed zijn om een tweede scherm te tonen met dezelfde opmaak als voor…
-
Bypass functionality
My gas boiler requires always at least one radiator to be opened to guarantee water flow. Alternatively I could create a bypass which opens up if pressure increases. What do you think of introducing this functionality in Tado? We could designate one radiator as bypass and let Tado automatically open it as soon as all other…
-
Temporary scheduled override
On occasion, such as getting up early, it would be great to be able to set a temporary scheduled override rather than having to adjust timeblocks for a number of rooms etc. Say the heating and hot water usually come on at 6am, but for this one day you need them to come on at 5am. With a temporary scheduled override you…
-
Mention remove the existing wireless receiver
Hi all, just installed the wireless starter kit v3+. The installation instructions for Viessman Vitodens 100-W B1KC did not say anything about removing the old wireless receiver. It would be nice with a little mention on that :)
-
Update și în limba română
Ar fii foarte bine dacă ați face un update și în limba română
-
Let the user set the Price/KWh
Let the user set the Price/KWh on the estimation tool
-
Do not report a room when it's not assigned to a Zone Controller
Hi team, I've defined a room with a smart TRV which I want to only open and close the valve but does not actually call for heating so I assigned the 'Zone Controller' to 'Not Assigned'. This works perfectly but the problem is this is reported in heating activity and Care & Protect which is actually wrong, since the room is…
-
Temperature graph overlap for multiple zones
I would like to be able to add multiple zones to the heating graphs so I can compare the total heated time given by the heating activity and when the heat is actually called for throughout the day. Using underfloor heating for a few zones it may be easier to identify when zones should be heating together to make the system…
-
Users with different roles
When looking at the user configuration it would be good to see that not all users have full control over the whole system. I am thinking about (for example) 2 roles: An Administrator role and a user role. Obviously, the Administrator can do everything. The user role can be connected to specific rooms and control that room.…
-
Lock for smart thermostat
Hi, Not sure if this has been suggested in the past, however a lock of the smart thermostat for me would be a great idea. I have one in my living room, and my daughter is constantly fiddling with it. On top of this, my sister in law is constantly blasting thw heating up to max when thete is no need. Being able to lock and…
-
GUI change - Until you resume / cancel schedule quick action buttons
No consistency between mobile and web apps: Until you resume schedule name appears on the web app Until You Cancel on iOS GUI change request: Add quick action buttons with predefined heating time
-
Alternative Schedule (for working from home as an example)
I've been using Tado successfully for several years, across houses and love it. I've got a 2 Thermostats, 9 TRVs and an extension unit for my hot water cylinder. Obviously I have a long embedded schedule setup and working well for my current house. I've recently updated it with the second Thermostat powering an external…
-
Regulation improvement
The target temperature given to the boiler is rounded because of boiler limitation. In some situations, the the room never reach the target temperature because the regulation compensate in the wrong direction. For example, if I set 20,4°C on the thermostat, the target on the boiler is rounded to 20°C. Thus, if the room…
-
Rest warmte gebruiken op andere kamer
Ik zou graag de functie willen. Als mijn woonkamer warm is. Ik de radiator op mijn slaapkamer kan open zetten. Zonder dat de cv ketel aangaat. Zodat de rest warmte mijn slaapkamer opwarmt. Mijn slaapkamer hoeft niet zowarm, maar als ik dit nu doet gaat ook de cv ketel weer aan. Wat denken jullie hiervan
-
Downloadable data
I love the Tado temperature/humidity graphs. However, the ability to only see the data on a day by day basis is restricting. The ability to download your data for use in a spreadsheet (in the same way that Fitbit does with its far more complicated data set) would be extremely useful. For example, it would be possible to…
-
Combined bridge power/ethernet wire
The included 30 cm power wire and ethernet cable contradict the advice that optimal positioning of the bridge should be vertical and not directly behind the router. It is very hard to get the bridge into a vertical position and on the wall while not being very close to the router. Tado also suggest the use of powerline…
-
Bridge Attachment kit
The tiny size of the Tado Bridge is a big plus point. However, I find that the double-sided sticky pads come unstuck every few days. I am therefore having to construct my own holder, or will have to use a very strong glue to permanently attach the device. A tab above and below with a screw hold would work better.
-
WIFI 6 Mesh Wifi or Thread IPv6 to solve range issues
Those with large houses or thick stone walls, will have undoubtedly come across range issues with Tado. They are also increasingly likely to have resolved these issues with mesh WIFI or powerline WIFI adaptors. WIFI 6 routers are not yet commonplace, but offer a low energy solution for TRVs and thermostats. Similarly…
-
Current Temperature Font
Hi, So even though my eye sight isn’t what it used to be, the font size for current temperature is tiny, it really does need to be made bigger and should be a pretty straightforward UI fix.