13 rooms and 15 Smart Radiator Valves: what to do?
I'm new to Tado and, despite searching, I've been unable to get an answer on how to set up 13 rooms and 15 valves.
I currently have two valves in the same room as the Wireless Thermostat, two in the dining room on a Wireless Temperature Sensor, two in a work room on a second Wireless Temperature Sensor and the other `nine valves in nine separate rooms.
With 12 rooms still needing to be set up I'm in excess of the maximum on the Wireless Thermostat. However, two of the rooms are rarely used so would it be possible to have the valves in those two rooms not 'connected' to the Wireless Thermostat but set with their own schedules with the result that they would only receive heat if another room was calling for it?
If it is possible, how do I set those two rooms up please and have the total number of rooms controlled by the Wireless Thermostat at the maximum of 10?
Best Answer
-
Go to the room and then set the zone controller as unassigned, which is ‘independent’
0
Answers
-
@digitl You have got it! The basics - you can configure 10 zones with up to 25 devices. We are like you, with more than 10 rooms than 'zones'. We have the lounge with a room stat and TRV - that is one 'zone' controlled by the room stat. We set the TRVs in two bedrooms as 'independent' - not connected to a zone controller - they keep warm according to their time/temperature schedule. They rely on other rooms/zones to call for heat, but the temperature is smarter than dumb TRvs with a single wall stat that would call for heat. HTH.
1 -
Thanks for the reassurance! How do I set them as 'independent' please?
0 -
Thanks, all set and working now.
0