-
Wunda floor heating replace Hortsmann Channel Plus H37XL, 3-zone timer with Tado
I want to replace a Hortsmann Channel Plus H37XL, 3-zone timer. My radiators and underfloor heating and water are controlled with it. The underfloor heating control box is a Wunda floor E8.583RF Wireless Control Centre, a photo of the circuit connections is in this PDF here -->…
-
Tado App
Recently replaced my tado thermostat and it works ok but app doesn’t show room temp throughout the day as before. Any ideas?
-
Hive to Taco
Hello! We've recently moved house and I want to bring my Tado system with us. There is a Hive Heat Link in the new place but when I have followed the installation instructions to the new Wireless Receiver (Gone from Combi Boiler to HW/CH system) the wiring steps don't match. My question is do I NEED a NC circuit? As there…
-
Does TaDo show the percentage of radiator valve opening?
I would like to know not only the temperature but also how much my radiator valve is open in percentage (like Bosch does). Can TaDo do the same? I can’t find it in the app…
-
New wireless temperature sensor showing as off-line
Hi all. Followed the install instructions - pressed the button for 3 seconds but nothing happens on the display. The device then does show up under rooms and devices if I back out out of the installation screen, but is offline. This is the second unit I've had the same problem with. The internet bridge is in pairing mode…
-
External temperature weather sensor product
Why do Tado not have an add on product that can be installed externally on to your home to take local temperature and switch off your central heating and/or air conditioning.
-
Paste All Schedule Button
these a "Copy schedule button" (CTA) and these a "Paste schedule button" (CTA) why is the not an "Paste All Schedule button" (CTA) next to the "Paste schedule button" it would save a lot of time coping and pasting
-
How to combine two Tado systems?
Here is the situation: My mom had a wireless receiver directly connected to the boiler and a wireless thermostat. In my previous apartment, I had my separate system (my own account) with several smart valves and a wireless thermostat. Now I moved in to my mother’s apartment and she left me her system. How do I combine her…
-
I want to wire the wireless receiver to a Vokera Compact 24 Combi Boiler.
The step by step Tado guide was a little unclear for me. Can someone help me with the wiring? I have attached two photos showing the current set up.
-
My tado wireless receiver shows in q not connected
It’s connected since yesterday still not connected show qued
-
Is the Tado v3+ wired compatible with Vaillant Ecotec Plus VC 356/5
Hi, Newbie here, is the Tado V3+ Wired compatible with the Vaillant Ecotec Plus VV 356/5 boiler, and if so, what is it best to link it with : OpenTerm or eBUS? Many thanks, M.
-
Accu
Ik installeerde 24 thermostats. Nu na 3 dagen geven er 2 melding van lege accu . 1 verving ik gisteren de melding op de andere is nu verdwenen. Is dit een gelend issue?
-
sorry wrong post, don't know how to delete this topic
sorry wrong post, don't know how to delete this topic. I had asked this question in Dutch untill I found out that I needed to select Dutch language frst.
-
Baxi cannot be turned off via the power off button
Hello, My boiler, Baxi Luna Duo-tec 1.24 E, is controlled via OpenTherm using the tado wired thermostat. Heating and DHW control works fine. I noticed that when I connected the thermostat via OpenTherm basically the boiler cannot be controlled via the HW buttons located on the front which is okay and expected, however also…
-
test1
test, please remove no need to deal
-
Why my thermostat keep disconnecting
The app shows everything is fine but then the unit connected to the boiler show alarm, the warning light and WiFi keep blinking! However if I make any changed in the app, let's say tune on one of the tado valves it just doesn't do anything, it shows it on the app with new changes but the change doesn't apply to the valve…
-
Old valves / system
Hi, I have a old systen, valves and bridge. When using the new app I cannot register the products because they do not have the same information (QR code / auth code) just serial numbers. Anyone know how to add these old parts to the new app? Steve
-
Tado with BOSCH heat tronic 3500
Is there someone who successfully connected tado with BOSCH heat tronic 3500 electric heater ? Please help.
-
Can I control floor heating room and boiler with same thermostat?
I have some radiator thermostats upstairs. Downstairs I have 4 rooms with floor heating. All 4 rooms have a wired thermostat. The one in the living room I now have as main thermostat to control the boiler. But now I cannot control the floor heating in the living room. I created a schema of how I have/want it. But I'm…
-
Hot water turning central heating on but heating doesnt, why?
This is a new installation, have the wires been done incorrectly? I have a combi boiler so no real need for a separate hot water function.
-
Why there is a strange sound coming from Smart Radiator Thermostat V3+ ?
I have several V3+ Thermostat but one of them is making strange sound the same as can be seen here on the video https://www.reddit.com/r/tado/comments/q77ufe/what_is_this_sound_and_how_do_i_make_it_stop/ Any idea how to solve it?
-
Migrating from Honeywell
Hi, I currently have a Honeywell system, where I have: 1x heated floors 7x radiators throughout the house for this I have 2 wireless Honeywell controllers with a respective RJ45 gateway. So I can control/see the data using HomeAssistant. Bearing in mind I already have a ZigBee gateway (on Homeassistant for some temperature…
-
Adding radiator thermostat to brand new v3 installation "something went wrong"
Hi all, Last Friday I was newly installing my wireless starter pack with a bridge, thermostat setup. That is working perfectly. When I then wanted to add the radiator thermostat (valves) I get an error when "registering the device", "something went wrong". This issue is with all valves I have, also with cellular as wifi,…
-
Is it possible to use Tado TRV Head with Tissino Hugo 2 Towel Warmer
Hello, Is it possible to use Tado TRV Head with Tissino Hugo 2 Towel Warmer? It is currently using the original double angle valves - https://www.tissino.co.uk/hugo2-double-angle-valves-anthracite - and I am wondering is it possible to use Tado TRV head instead and do I need any special adapters? Thanks for your help!
-
How do I get the display to show open window detection?
The feature works but the display doesn't show the open window symbol.
-
Can the home screen grid be changed to allow more tile on screen?
My phone and tablet show the tile grid as two tiles wide with a lot of wasted space. I remember having seen three tiles wide at some stage, don't know what's changed. These are screenshots of my 12" tablet in mobile mode and desktop mode. I always use mobile mode,
-
DIY install
Hello. I am hoping a kind soul can help me. My partner recently purchased a Tado V3+ Wireless Heating & Hot Water Smart Thermostat Starter Kit (141KT) for a flat she rents. The flat contains a Potterton Promax SL boiler and a hot water cylinder. There is a main Danfloss TP9000 MA-SI controller wired into the boiler, a…
-
Collegamento router
Buongiorno Ho appena acquistato un Tado ma non riesco a collegare alla Wifi. Non dispongo di un router con le prese eternet ma ho il cubo della windtre. Come faccio a risolvere il problema...se installo un ripetitore wifi che abbia la presa eternet posso collegarlo all'internet bridge....?
-
Trv not fitting on, other did I thibk
Have fitted two others on but this one won't work for some reason. I'm not 100% sure others are working either. What's best way to be sure they are turning the rads down? https://ibb.co/wrLNv9P is the image Have a veissmann 100w and opentherm via wired thermostat.
-
New setup with solar
Hi All new here My existing system Vaillant ecoTEC pro 2013 connected to Vaillant VCR 470 programmer. I have had solar fitted this year along with a 200l hot water tank heated via a solar iboost. The hot water tank is also connected to the flow and and return from the boiler via a motorised valve with the idea that when…