-
ATAG Q30cc with BrainQ thermostat
Can I replace the ATAG BrainQ thermostat with a Tado ? My boiler is an ATAG Q30cc type. Thank you
-
Can you help me verify what items I need for my Tado installation?
L.S., I want to purchase a Tado set and I need help determining what I need. My installation: 1x Remeha boiler 2x radiator (1 per room, first floor) 1x floor heating system (2 circuits, but one room) My questions: What wireless thermostat do I need that can (through a secondary device) switch the zone-valve? What model…
-
Is it possible to add hot water feed back to tado?
Hi, I have a Air source heat pump plumbed in like a standard S plan system, the system has priority heating for water, Is it possible to add a feed back loop into tado so that once the tank hits the temp set by the tank stat the tado switches off the water heating cycle and continue with the central heating cycle? Reason I…
-
Can I connect Alexa to Tado trvs no thermostat
Hi I have a very simple question can I only have Tado TRVs but I Nest thermostat can I still connect to Alexa to control the TRVs obviously I have a connected Tado Bridge ? Just finding that Alexa doesn’t discover valves even though the accounts have been linked etc. Thanks
-
Second thermostat or add-on wireless receiver?
We are have a Vaillant EcoFit Pure 835 combi boiler with no hot water tank. Downstairs we are having water based underfloor heating in a single zone. Upstairs we are going to have a mix of Smart Radiator thermostats and standard thermostatic radiator valves set to frost protection. I’ve ordered a V3 wireless Starter Kit…
-
Moved house, can't seem to set up the extension kit.
Just moved into a new house with a Y system (motorised valve is brand new), which has Tado, namely a smart thermostat, internet bridge and an extension kit, I have created Tado account and added all the devices, first the Smart thermo, all good, then the internet bridge, no problem, on reaching the extension kit I followed…
-
Telephone number
Does tado have a uk support number, need information on the installation of thermostat and rad thermostat, I have tried the online chat but not helpful need to speak to a person… thanks
-
Tado and Nordpool spot price Market data
It would be great to be able to save energy if the Tado-app had the spot price market data from Nordpool that is presented every day at 1300, for the coming day. That data together with some possibilities for the users to easily plan the heating in advance can save a lot of money. Today Tado can schedule by time only. But…
-
2 weekly schedule
My kids are at home In a 2 weekly cycle. So week 1 they are in on wed, thurs, Friday and week 2 on wed, thurs,Friday,sat,sun etc. All smart thermostat systems are based on weekly schedules.so for the even weeks I am ok but for the uneven weeks I need to switch off manually. Could tado become the first with 2 weekly…
-
Tado Purchase ??
Hi, I currently have a new ideal logic+ combi boiler that is controlled by a Drayton Digistat+3. This is connected by 2 low voltage cables (Red = C / Yellow = On) there is also a blue wire that is not connected. Basically I am wanting to replace this with a smart app controlled stat and wanted to know if the Tado is…
-
What kit do I need for 2 boiler house?
Hello. I have an old cottage with a new extension part. There are 2 modern Worcester boilers with wireless thermostats. One boiler does the old part of the house, one boiler does the new part. We have underfloor heating in the kitchen area that has a TRV located in the boiler cupboard which seems a bit naff. I’ve started…
-
Tado on single zone wet UFH
Hi, Looking for guidance on this. I have 7 tado TRVs installed and am about to instal the receiver ( or whatever they call it ) so they call for heat. On my last system ( 8 years ago so I’m struggling to recall) i installed a wireless thermostat to control the UFH pump and valve from what was the ‘hot water’ side of the…
-
Zone and TRV additional zone
I live in a town house which as a 2 zone system. Zone 1 is ground and middle floor , zone 2 is top floor. My lounge I have added some TRV’s to create another zone (zone 1.1) If zone 1.1 TRV’s are calling , but zone 1 is satisfied then zone 1.1 doesn’t heat. Is there a way that I can set that zone 1.1 also calls zone 1 as…
-
What Tado equipment do I need?
Hello all, I'm hoping to switch over from a Nest v2 setup to Tado in the coming months, So have a question about what equipment I need. Details on my current setup below: New build, brand-new heating system (2015). Two zones in the house, upstairs and downstairs, can be controlled independently. Downstairs, controlled by a…
-
Adding a single room wet UHF to a tado-controlled radiator home
Hi, We're renovating our small kitchen and want to use a wet UFH system as there isn't space for an effective radiator. The rest of the house is all radiators in a single zone, powered by a combination boiler. We use the original Tado thermostat to control the temperature in the main living area, and smart radiator valves…
-
Adding temp sensor and programer
Hello, newbie here needing advice. I already have smart radiator thermostats fitted. I'm thinking about getting a smart wall thermostat for the living room with the receiver (programmer). If the temperature on the living room thermostat was set low, would I still be able to heat the rest of the rooms? I'd appreciate your…
-
Adapters do not fit
The included adapters for my Danfoss valves age 1974, do not fit. They are a few millimeters too big. The thermostat is pushed off when the valve gets hot. I have bought new adapters that are similar to those included in the packages, but they are a few millimeters smaller, so they hold the thermostats firmly. I'm not…
-
Does Tado Wireless Smart Thermostat V3+ work with Protherm Tiger
Hi, does anyone know if Tado Wireless Smart Thermostat V3+ works with Protherm Tigras Condens 20/26 KKZ42 2,8-21,9kW to the full extent? I heard that ebus control is dropped in UK and though you can connect it with extension kit, it doesn’t modulate. What about the EU? Does thermostat have all features with ebus control in…
-
What kit needed to make smart radiator works
Hi everyone, I'm a newbie and clueless about heating . So before I went and bought smart radiator kit , I consulted the tado team and they confirmed i just needed the smart radiator kit . So here is what I'm trying to achieve, currently in order to heat up my 2nd room I have to turn on the thermostat in main bedroom which…
-
Rav adapter too loose
Hi! Have the Danfoss RAV sockets and have tried using the adapters from Tado, but no matter how much I tighten them, they are still a bit too loose. Any suggestions on how to fix this problem?
-
Can Tado app users delete other users?
I'm wondering if I set up a 'Home' in the app, then invite others, can they then delete my account? I can see I can remove them. Or is there a concept of an account 'owner'?
-
Is this valve compatible with the Smart Radiator Thermostat?
Could someone tell me if the valve on the images is compatible with the radiator thermostat? Thanks in advance
-
Thermostat crashes when mounted
Hi all. After a firmware upgrade to 54.20, one of my thermostats is no longer functioning. I have new batteries and had no previous issues with this one, and it starts up with its usual hello, but now, as soon as it mounts it just crashes - turns itself off no mounting process and nothing on the display when turning it.…
-
Radiator valve connector/adaptor advice
Hi . I recently moved house where I had a full Tado set up with valves on all radiators. I left it all behind and want to do the same in my new home but the radiators have a different screw connection than my old ones. I have no idea what they are called but here is a photo. As you can see there is no actual screw…
-
Underfloor heating + radiator setup
Hello! I have already several Tado valves installed in radiators, and I'm going to renovate my house and install underfloorheating in some areas. Planning on using SRVs for each 'zone' in the underfloorheating distributor as actuators and smart thermostats on each room (would be linking them so that the sensing is done by…
-
Can I set the schedule for all days of the week through the API?
Hello I'm using the TADO API to set the schedule for various days of the week. The schedule for each day is different, so the zone in question has the timetable type SEVEN_DAY. So far I'm setting the schedule independently, sending a PUT to:…
-
Moving from Nest wireless downstairs with upstairs wired thermostat
Hi, Our Nest packed it in, so I’m looking to shift to Tado but I’m unsure about what to buy. Our setup is this: Originally our Grant Multiboiler had two wired (Honeywell) wall thermostats, one upstairs and one downstairs. This was changed to a downstairs wireless Nest with the heat link installed at the boiler. (The…
-
Is it possible to get the temperature and humidity of the devices independently?
I'm developing an application, to display the information of the thermostat of an apartment, but it is necessary to know the information of each valve independently. I went through the TADO API endpoints and so far I have only been able to get this information from 1 particular zone. Is there any end point with which the…
-
boiler hunting since fitting Tado system
My tado system system is causing my Worcester Greenline boiler to make hunting sound as if it maybe struggling. The boiler was new and instsled about a year ago.
-
Moving to a new flat and after tado set up help
Hi all, So i have a honeywell cm701 controller on the wall and a baxi duo tec 2 combo boiler and that's a 28GA model I see on the net someone with a the same ish controller and 2 wires in side to hard wire to the boiler. So help i need is will i be ok with a controller in hall way . i will need as well 5 rad controllers (…