-
Use 1 decimal degree Celsius precision on Smart Thermostat
While the app allows setting the temperature in 0.1 degree Celsius increments, the Smart Thermostat only supports 1 degree Celsius increments
-
Second home problem
It is, as I have found from Taco support, possible to control 2 homes from the Tado app. However, to do this, one has to log out and then log in to the second home using a different email address as a username. With his quality product, I'm surprised that Tado haven't addressed this problem in their app.
-
2FA / MFA - EU legal requirement
Hi, I've created a new post to again highlight the importance of this to Tado. Without 2 factor authentication/MFA, Tado will soon be in breach of EU law. In 2022, the EU Commission proposed the Cybersecurity Resilience Act (CRA) which introduces mandatory cyber controls to, amongst other things, IoT devices including Tado…
-
Cooling function for Heat Pumps with floor cooling
Please create a function where we can use Tado with a heat pump (equipped with a cooling function) connected to a floor heating system to cool the rooms (with Tado thermostat) to the specified temperature. Each room is equipped with Wireless Smart Thermostat or Wireless Temperature Sensor. The heat pump is connected to the…
-
Black edition TRVs
It’d be super if there was a black edition TRV to match the new black edition thermostats - would look nicer on black radiators than the existing white ones IMO
-
App with admin (full) and users accounts (limited)
I would very much appreciate it when you introduce asap the possibility to setup admin (full access) and user (limited access) accounts in the tado app. In fact i was disappointed and amazed that this is not possible at the moment. You don't want all users to have access to all settings.
-
Multi home
Bought Tado for my Airbnb, love it - bought a 2nd system for my home only to discover no multi home function. Have since read on this forum, and other places, it’s not available so had to return. C’mon Tado… you are not listening to your customers… it’s a pretty basic - and fundamental - requirement!
-
Temperature alarm
It would be good to be able to set alarm if the real temperature is not following scheduled temperatures. Then we would be able to react. Best regards
-
Black or Anthracite thermostat
Are there any plans to bring out a black or anthracite grey colour for the actual thermostats. I am fitting three anthracite radiators into a new kitchen and would prefer a more suitable colour than white.
-
Boost heating until custom temperature is met
Hi, I would like to suggest a custom feature that. Currently when you boost heating it keeps going until the temp hits 25 or is turned off. I suggest you should be able to boost the temperature to a custom defined temp such as 21 or 22 degrees. Many thanks Neil
-
New Device - Tado Immersion Hot Water Heating Controller
Many homes having a hot water storage cylinder would also have the hot water heated by an element in the cylinder either as standard or as a backup option to the gas heating system. I wanted to raise this subject here to help gauge if there is actually an interest within the community of Tado users? Do you have a hot water…
-
White text on grey background (Temperature graphs in dark mode)
I'm using general dark mode on my device (Android) With the the latest application update the inside and outside temperature display has been changed from black text to white text (on a light grey background. The text has become unreadable. Can you change that back please ? Edit: additional info, In normal (non dark mode)…
-
Hot water boost via app
There used to be functionality using the app whereby you could boost the hot water for a limited period of time, say 1/2 hr then it would return to schedule. As it now works you can only override the schedule and turn the hot water on. If you then forget to turn it off it will run 24/7, not good at all..
-
Activity log viewer
Hi have read your summary of missing / development requests. Is there any movement on these. I am frustrated that there is no way of viewing the log activity for room temperature, boiler control, manual interference, who did what and when. There are spurious times when the heating or water comes on and I don’t know why. A…
-
Humidity trigger
I think it would be nice to have a humidity trigger as well as temperature trigger. As an example I have a TRV in the basement where the desired humidity is btw 60-70 and the temperature is not really important. It would be great if the TRV kicks in when the humidity is as an example above 70
-
Hot water cylinder temperature control
I have the hot water extension kit installed next to my hot water tank. probably as per most peoples set up. It would be nice to have a wireless piece of kit that replaces the hot water tank temperature gauge that either connects wirelessly to the hot water extension kit or is wired in...
-
Set "away" the separate room
The geofencing can switch off the heating of the entire house. But, the possibility of the setting one room is missing. For example, the children are out for one week. Why fully heat their room?
-
add LPG to Fuel type
would i be possible to add LPG to Heating Type with the calculations to work with graphed data to reflect price and KWH for unmetered connections
-
All thermostats history on one graph
It is very difficult to analyze the operation of the entire heating system. For example, it is difficult to see the effect of a thermostat in one room on the temperature in another. It is also difficult to say how often the heating request is sent because each thermostat sends it independently. It would be very helpful to…
-
Temporary scheduled override
On occasion, such as getting up early, it would be great to be able to set a temporary scheduled override rather than having to adjust timeblocks for a number of rooms etc. Say the heating and hot water usually come on at 6am, but for this one day you need them to come on at 5am. With a temporary scheduled override you…
-
Lock for smart thermostat
Hi, Not sure if this has been suggested in the past, however a lock of the smart thermostat for me would be a great idea. I have one in my living room, and my daughter is constantly fiddling with it. On top of this, my sister in law is constantly blasting thw heating up to max when thete is no need. Being able to lock and…
-
Better Graph
Hi, I found the temperature graph lacking zoom and pointing (to have a more precise idea of the time when browsing the item). I had a Netatmo before and their graph was a little bit more usable. Cheers, lilion
-
[Released] Make the size of the current temperature in the Room Screen bigger
[tado edit]: Scroll down to see our reply from November 15th, 2021. [Original text]: On the room screen, why have Tado made the current room temperature in the room so small that (some of us with poorer eyesight) cannot see what the inside temperature is before moving the scale? this is in the top left of the screen and…
-
Multiple households
Pretty sure this idea already been suggested in the past, but I still want to re-suggest the idea. A function to manage several households with one account would be really useful for many users.
-
Wireless Receiver supporting more heating Relays (multi zone)
I have a Wavin ahc 9000 controlling my underfloor heating system. As I understand it I can use the wireless receiver to control one channel of the wavin ahc 9000. All the other channels need to have wired connections to the tado smart thermostats. But in my case I have everything wireless, so I can only control 1 rooms…
-
All off for X time or until hh:mm
I love the new "All off" or "boost heating" buttons. It would be great to be able to add a time to these features. For example: All off until 20h00 All off for 3 hours All off until 10.04.2021 @ 8h00
-
Winter/Summer
Hi, is it possible to add a ‘switch’ in the app to change from winter to summer. This is so that ALL of the heating can be change from either "WINTER HEATING ON" and "SUMMER HEATING OFF".
-
Improve Care&Protect boiler fault detection
The problem i encounter is easy to explain. If for example my TADO is programmed to turn my boiler on (be it automatically or manually), and for whatever reason the boiler is either Off or the mains is down, TADO doesn’t inform that the boiler isn’t on. In this second report I have sent, the boiler was resetting itself due…
-
Increase maximum "Open Window Detection" shut off duration
The Open Window Detection Heat Shutoff Duration has a wheel to select the number of hours. But you can’t use it, as the maximum duration is just 1 hour, so it’s redundant, only a minute wheel is required. However, I would like for the maximum to be greater than 1 hour as I often open the bedroom window for many hours to…
-
Leave the valves opened in 1, 2 or 3 gears
Nowadays we can close the valve (OFF) or open it fully (25º), and the control is based only in the temperature that the valve is measuring. The thing is that in my area where it below 0º at night, the valve is constantly opening and closing, with the noise of the small engine attached. To avoid this noise, the idea is to…